Enabling Wi-Fi Network Connection (iT100)

The following steps will need to be taken to attach a Wi-Fi enabled iT100 to a wireless network.

Start by clicking on the Menu button in the upper right corner.

Open

From the Main Menu dialog that displays, select Admin Menu.

Open

You will then be prompted to select how to authenticate yourself as an administrator.

• Select Biometrics if you have been enrolled in the clock with your Supervisor ID/Badge

• Select Time Terminal Account if you have not enrolled any supervisors or you do not have a Supervisor ID/Badge

Tap on Network in the Settings Menu.

Tap on the Wi-Fi connection option at the top.

Tap on Off (gear icon) to open the Wi-Fi configuration screen.

Toggle the Wi-Fi connection on via the Toggle switch in the top right corner.

Select an available network from the list by tapping on it.

Enter the password for the selected network and then tap Connect when ready to connect.

You should be returned to the network list and your chosen network should show as being connected. If there was an error during connection, you should see that as well.