/
Configuring an IT-3100 with Static Network Information
Configuring an IT-3100 with Static Network Information
Configuring the IT 3100 to use static network information must be done at the clock. This must be done when Network the clock is on does not support DHCP, the clock needs to be placed on a specific network, or Attendance Enterprise needs to communicate directly to the clock for polling and updating. Before you begin this process, please contact your IT Staff to obtain the correct Static Network Information.
- Press the
- Type 1905 and then press the
- Press
- Press
- Press
- Press
- Press
- Press
- Use the keypad to enter the IP address that is assigned to the clock
- If one of the segments is not 3 digits long (192.168.1.200):
- Enter it with 1-2 zeroes at the beginning to make the segment 3 digits (192168001200)
- Press to skip to the next segment.
- If any part of the IP address is entered incorrectly, press to delete digits and then enter the IP Address again.
- If one of the segments is not 3 digits long (192.168.1.200):
- Press
- Press
- Use the keypad to enter the IP Network (subnet mask) that is assigned to the clock
- If one of the segments is not 3 digits long (255.255.255.0):
- Enter it with 1-2 zeroes at the beginning to make the segment 3 digits (255255255000)
- Press to skip to the next segment.
- If any part of the IP address is entered incorrectly, press
- If one of the segments is not 3 digits long (255.255.255.0):
- Press
- Press
- Use the keypad to enter the IP Gateway that is assigned to the clock
- If one of the segments is not 3 digits long (192.168.1.1):
- Enter it with 1-2 zeroes at the beginning to make the segment 3 digits (192168001001)
- Press to skip to the next segment.
- If any part of the IP address is entered incorrectly, press to delete digits and then enter the IP Address again.
- If one of the segments is not 3 digits long (192.168.1.1):
- Press
- Press
- Use the keypad to enter the IP DNS address that is assigned to the clock
- If one of the segments is not 3 digits long (192.168.1.23):
- Enter it with 1-2 zeroes at the beginning to make the segment 3 digits (192168001023)
- Press to skip to the next segment.
- If any part of the IP address is entered incorrectly, press to delete digits and then enter the IP Address again.
- If one of the segments is not 3 digits long (192.168.1.23):
- Press
Press
until you are back at the Setup menu.The clock needs to be restarted before it will utilize newly programmed static network information.
- Press
- Press
- Press until the clock begins to restart.
, multiple selections available,
Related content
Configuring an IT-3100 with Dynamic Network Information
Configuring an IT-3100 with Dynamic Network Information
More like this
Configuring an GT 400 with Static Network Information
Configuring an GT 400 with Static Network Information
More like this
Changing the IP Address of an IT 2100 with MatchComm (Full)
Changing the IP Address of an IT 2100 with MatchComm (Full)
More like this
Setting the Local Server IP on an IT 3100
Setting the Local Server IP on an IT 3100
More like this
Changing the IP Address of an IT 2100 with MatchComm
Changing the IP Address of an IT 2100 with MatchComm
More like this
Setting the Network IP for a F-Series Handpunch (Legacy)
Setting the Network IP for a F-Series Handpunch (Legacy)
More like this