Employees Punching (GT 400)

Owned by Nathan Brick
Last updated: Jan 03, 2018
1 min read

Employees must be enrolled at your time clock, and know there badge number.



  1. Enter BADGE #  and press .


  2. Have the employee place their hand on the platen and wait until prompted to remove it.
    1. Be sure that the employee’s hand is placed on the platen in the same position each time and that all five red lights turn off.

    2. The employee's hand will need to be placed 1 time.

  3. When the Punch is completed successfully, the screen will say "Transaction Accepted  or the Employee Name".
    1. After a short pause, you will be returned to the time and date.  The unit is now ready to have the next employee punch.


*** If you are having issues punching make sure the time clock is clean.  Three main parts to keep clean are the platen (where the hand goes), the side mirror, and the top visor. Â