/
Revert to Factory Defaults
Revert to Factory Defaults
Revert to Factory Defaults
IT -3100
Hit the F8 Key. This step gets all the punches from the clock.
Press the
button.
Type 1905 and then press the
button.
Press
to highlight Settings and press
to select.
Press
to highlight Device and press
to select.
Press
to highlight Revert to Factory Defaults and press
to select.
Unplug clock or Press to highlight Restart Terminal and press to select.
Press
until the clock begins to restart.
Hit the * Key to load back settings. This may take some time.
User clock settings will need to be added back. Such as a reader or non DHCP network settings.
, multiple selections available,
Related content
Sign Into Time Terminal for iT100
Sign Into Time Terminal for iT100
More like this
Configuring an IT-3100 with Static Network Information
Configuring an IT-3100 with Static Network Information
More like this
Configuring an IT-3100 with Dynamic Network Information
Configuring an IT-3100 with Dynamic Network Information
More like this
Requesting Device Replacement
Requesting Device Replacement
More like this
Performing a Factory Recovery on an IrisID Device
Performing a Factory Recovery on an IrisID Device
More like this
Changing the IP Address of an IT 2100 with MatchComm (Full)
Changing the IP Address of an IT 2100 with MatchComm (Full)
More like this