Before employees can be enrolled at your time clock, they must have a badge number. Once your employees know their badge number, they will be ready to be enrolled.
- Press the
button (top button on the right side of the screen).
- Enter 1358 when prompted for a PIN and press
.- PINs may vary. Contact Tech Support if this PIN does not work.
- PINs may vary. Contact Tech Support if this PIN does not work.
- The Enrollment Menu will be displayed on the screen with Enroll being the default selection.
- Press
- When prompted, Enter the employee's badge number and press
- Have the employee place their hand on the platen and wait until prompted to remove it.
- Be sure that the employee’s hand is placed on the platen in the same position each time and that all five red lights turn off.
- The employee's hand will need to be placed 3 times.
- Be sure that the employee’s hand is placed on the platen in the same position each time and that all five red lights turn off.
- When the enrollment is completed successfully, the screen will say "Completed. Thank You!".
- After a short pause, you will be returned to the Enrollment Menu where you can continue to enroll employees, if necessary.
- After a short pause, you will be returned to the Enrollment Menu where you can continue to enroll employees, if necessary.
- If you are finished enrolling employees, Press
- Press the
button (bottom button on the right side of the screen) to synchronize the clock with the server.