| Note |
|---|
Before employees can Employees must be enrolled at your time clock, they must have a and know there badge number. Once your employees know their badge number, they will be ready to be enrolled. |
...
- Type your bage number
button (top button on the right side of the screen). - Enter 1358 when prompted for a PIN and press
.PINs may vary. Contact Tech Support if this PIN does not work.
The Enrollment Menu will be displayed on the screen with Enroll being the default selection.
Press to begin enrollment.
When prompted, Enter the employee's badge number and press.
BADGE # and press. - Have the employee place their hand on the platen and wait until prompted to remove it.
- Be sure that the employee’s hand is placed on the platen in the same position each time and that all five red lights turn off.
- The employee's hand will need to be placed 3 times1 time.
- Be sure that the employee’s hand is placed on the platen in the same position each time and that all five red lights turn off.
- When the enrollment Punch is completed successfully, the screen will say "Completed. Thank You!Transaction Accepted or the Employee Name".
- After a short pause, you will be returned to the Enrollment Menu where you can continue to enroll employees, if necessary.
to exit the Enrollment Menu.
Press the
button (bottom button on the right side of the screen) to synchronize the clock with the server.- time and date. The unit is now ready to have the next employee punch.
- After a short pause, you will be returned to the Enrollment Menu where you can continue to enroll employees, if necessary.
*** If you are having issues punching make sure the time clock is clean. Three main parts to keep clean are the platen (where the hand goes), the side mirror, and the top visor.