Setting the Local Server IP on an IT 3100

Owned by Mike Hart
Last updated: Jan 30, 2017
3 min read

Setting the Local Server IP for the IT 3100 has to be done at the time clock. This must be done when the IP address of the server the time clock communicates with has changed. Before you begin this process, please see your IT Staff or contact ICI Tech Support to obtain the correct Attendance Enterprise Web Server IP address.


  1. Press the  button.

  2. Type 1905 and then press the Check button.


  3. Press Down Arrow to highlight Settings and press Check to select.

  4. Press Down Arrow to highlight Polling and press Check to select.

  5. Press Down Arrow to highlight Polling Server and press Check to select.

  6. Use the keypad to enter the IP address of the Attendance Enterprise Web Server
    1. If one of the segments is not 3 digits long (192.168.1.200):
      1. Enter it with 1-2 zeroes at the beginning to make the segment 3 digits (192168001200)
      2. Press Right Arrow to skip to the next segment.
    2. If any part of the IP address is entered incorrectly, press Left Arrow to delete digits and then enter the IP Address again.

  7. Press Check to confirm the new IP address

  8. Press X until you are completely out of the menus and the date and time appear on the screen.

  9. Press F8 to initiate a sync to the new server.