Configuring the IT 3100 to use static network information must be done at the clock. This must be done when Network the clock is on does not support DHCP, the clock needs to be placed on a specific network, or Attendance Enterprise needs to communicate directly to the clock for polling and updating. Before you begin this process, please contact your IT Staff to obtain the correct Static Network Information.
- Press the
button. - Type 1905 and then press the
button.
- Press
to highlight Settings and press to select.
- Press to highlight Device and press to select.
- Press to highlight Communications and press to select.
- Press to highlight DHCP and press to select.
- Press
to change the DHCP option to Yes and press to confirm. Press
until you are back at the Setup menu.Info The clock needs to be restarted before it will utilize DHCP to obtain network information.
- Press to highlight Operations and press to select.
- Press to highlight Restart Terminal and press to select.
- Press until the clock begins to restart.